A solution which allows you to replace your lamp by saving up to 50%.

A Genius alternative, the bare projector bulb is sold separately, without the cartridge. It is therefore necessary to retrieve the defective lamp's cartridge when extracting the projector bulb from the projector lamp.

Once the old bulb has been removed, the new one must be fitted into the cartridge, and both elements must then be reinstalled into the projector.

We invite you to consult our clients' testimonials on Genius bare projector bulbs

This DIY solution for the replacement of your projector lamp or bulb saves your money!

Our guarantee

Justprojectorlamps.com only offers Genius DIY projector bulbs for lamps allowing a straightforward and easy removal and reinstallation of a bare bulb. We do not recommend this solution if complex handling operations are required. Installing a new Genius bare bulb should be a quick and easy procedure without any risk of damage to the bulb or to the cartridge.

For more information see the official website of "http://geniuslamps.com/" Genius lamps.

 Lampe Genius


The Genius logo: The guarantee of a certifed lamp


Why pay more for a replacement projector lamp of identical quality?

Original Inside replacement projector lamps consist of high quality original bulbs which are provided and certified by the manufacturer, and of generic cartridges housing the bulb (also known as trolleys, contours, supports or chassis). The performances of a projector lamp are solely dependent on the quality of the bulb, and those used in Original Inside replacement projector lamps are 100% equal to those used in classic original projector lamps, in terms of luminosity, lifespan and colorimetry.

Original Inside lamps = Original bulb + generic cartridge.

Please note that in respect of replacement lamps for Epson projectors, the Original Inside lamp consists of a bulb made by Philips and a generic housing.

For more information see the official website of "http://originalinsidelamps.com/en" Original Inside lamps.

 Lampe Original Inside


The OI logo: The guarantee of a 100% original bulb.


Justprojectorlamps.co.uk has been selling a large range of Genius replacement projector lamps for more than three years. Many of our clients have chosen these high quality products sold at extremely interesting prices, and we invite you to consult our clients' testimonials on Genius projector lamps "href=original-inside-projector-lamp-bulb/client-testimonials.html" to read testimonials.

A reliable and economic alternative

As is the case with memory cards for PCs or printer cartridges, some companies in the audio-visual market are now providing Genius replacement projector lamps. All Genius projector lamps on offer on justprojectorlamps.com are manufactured to strict standards and submitted to a high level of controls and tests relating to the projector's performance. Their voltage, contrasts, life span and luminosity are all benchtested. All Genius lamps comply with ISO 9001 standards.

For more information see the official website of "http://geniuslamps.com/" Genius lamps.

 Lampe Genius


The Genius logo: The guarantee of a certifed lamp


An original replacement projector lamp is equipped with an original bulb, thus ensuring an optimum lifespan and the best possible image quality. It allows you to keep the manufacturer's guarantee on your projector.

You can order an original replacement projector lamp from justprojectorlamps.com in the UK for virtually all projector models sold on the European market. The replacement of a projector lamp is a simple operation which does not cause any damage to your projector. In most cases, opening a simple access panel protected by a screw allows you to carry out the replacement of the lamp.

Find the UK best price for original replacement projector lamps
Manufacturer-certified products
Huge stock
Fast delivery

Home > Our answers to the most frequent questions about video projectors

TECHNICAL ADVICES

Our answers to the most frequent questions about video projectors

· The questions presented below are our most frequent asked questions , our six years� experience serving projectors uses allow us to responses appropriately in the following areas:

  • Projectors technologies and choice;
  • Projectors setting ;
  • Projector Maintenance;
  • What do to if your video projector doesn't start after you have installed a replacement lamp ?

    Several potential reasons:Several potential reasons: 1) The new bulb has been installed incorrectly; 2) The counters (lamp and/or filter) have not been reset, the thermal protector has not been re-initialized; 3) The...

    What to do in case of weak projector lamp's brightness

    Several potential reasons: 1) The projector lamp life is coming to an end; 2) The lamp's luminosity is adjusted too; 3) The lamp power supply is deficient. Please also refer to the projector menu in order to find out what ...

    How to reset a Mitsubishi projector lamp timer ?

    Customer questionProjector model (PLVZ5, EMP-75C..) HC3000 Question details Hello, I have bought a replacement lamp for my HC3000 with you. Can you please tell me how to reset my lamp counter ? The lamp replacement messa...

    What to do if the projector lamp makes a whistling noise ?

    Customer questionProjector manufacturer Mitsubishi Projector model HC3000 Question details Hello, I bought a replacement lamp for my HC3000 with you. The new lamp makes a lot more noise (a kind of whistling) than th...

    How to restart the projector Sony VPL-ES7 ?

    Question from customersSONY VPL-ES7 Question from Anastase D. : Hello, My projector SONY VPL-ES7 does not turn on, the light does not appear when it is connected. What can be the problem and how much is the repair, pl...

    What causes white dots on the screen of my projector ?

    Question from customersQuestion from Giovanni U. : On my projector screen appear white spots, they blink, after they freeze. In addition, they multiply quickly. Is it the light or it is something else? Answer from justprojec...

    What causes the flashing picture at the startup of my projector Mitsubishi HC3200?

    Question from customersQuestion from Frédéric PREGNON: Hello, I ordered from justprojectorlamps.co.uk a lamp VLT-HC3800LP, an original lamp for MITSUBISHI HC3200. Installed for less than two months with 62 hours of use,...

    Are you able to change a Hitachi CP-X260 projector lamp without his support?

    Question from customersQuestion from Philippe I. : Hello, Am I able to change the bulb in my projector without support? Thank you for your response. Answer from justprojectorlamps.co.ukHello, Sometimes you b...

    Why the lamp of your Sanyo PLV-Z4 projector or Sanyo Sanyo PLV-Z5 projector does not turn on?

    Advices from justprojectorlamps.co.uk If the lamp of a projector Sanyo PLV-Z4 or PLV-Z5 does not turn on, you should think to reboot button thermal protection. Your lamp is surely in perfect condition, there is no need to buy a...

    How to reduce the width of the picture with a projector Epson EH-TW5900?

    Question from customersQuestion from Annie A. : Hello, I can not decrease the width of the picture comes out of my projector Epson EH-TW5900. Thank you for advance for your response. Answer from justprojectorlamps.co.uk...

    Why there are vertical and horizontal banding on the screen of a projector NEC NP600 ?

    Question from customers Question from MARLIER I do not know if I should change the lamp of my projector or there is a more serious failure in the projector: there is a vertical banding unlit right of the screen, and horizon...

    What causes the yellow shade in the bottom of the projector screen? Could we take advantage of the warranty if the problem is the lamp of the projector?

    Question from customersQuestion from Jean-marc P. : Hello, We do not have chance with your projector lamps. I sent you the invoice and a picture of two projected images. There is a yellow shade in the bottom of the s...

    What could cause the smell of burning plastic after replacing the lamp in my Mitsubishi HC5500 projector?

    Question from customersQuestion from Anis B. : Hello, I received my new lamp for my Mitsubishi HC5500 projector. I just replaced the old one and I followed the procedure correctly. The lamp lights up well but after an hour ...

    How to reset the lamp timer projector?

    Advices from justprojectorlamps.co.ukHello, Following your call, here is the procedure to reset the lamp timer for different brands of projectors: BENQ Turn on the projector; Press the button « MENU » ; Choose «...

    New projector lamp: what can we do if it does not light after we bought it?

    Question from customersQuestion from Jean R. : Hello, I bought a projector lamp, arriving home it is already out of use. I sent you an email to tell you this bad surprise. You asked me to return it and that's what I've don...

    Optoma Projector Screen: what causes the white spots?

    Question from clientsQuestion from Stéphane L. : Hello, You've delivered a lamp for my Optoma projector: I had ordered it because there were spots on the projection screen. After setting the new lamp, white dots still appe...

    Screen projector EPSON EMP-TW20H: what is the origin of the unpleasant yellow color?

    Question from customersQuestion from Beatrice and Patrick L. : Hello, I just replaced the original lamp of my EPSON EMP-TW20H by the new lamp and I see that whatever the color settings made on the program, in the left side...

    Cleaning the projector filter: To make your projector and your projector lamp more efficient and keep them in good working condition

    Question from customersQuestion from Dan Jenny : Hello, I am very surprised not to find in the original packaging, the filter would normally be with the lamp and must be changed. Do you have an answer for me? I want to...

    Screen projector Sanyo PLV-Z700: what is the cause of the light green wire visible after replacing the compatible lamp Sanyo LMP135

    Question from customersHello, I address you to help me to resolve my case. I ordered a lamp Sanyo LMP135 and after installation of the new projector lamp for my projector Sanyo PLV-Z700, there is a light green wire thread thro...

    Packing projector lamp: what is the importance of maintaining it in good condition?

    Question from customersQuestion from J?r?my G.: Hello, I wish to send you my projector lamp that you can check it, but I no longer have the original packaging. Is it possible that I will return it with a simple packet? ...

    Message « replace lamp » on the projector screen: how to remove it?

    Question from customersHello, After replacing the lamp in my projector with a new lamp projector, the message « replace lamp » does not disappear from the screen. I reset the counter but it did not resolve the problem. Than...

    New projector lamp for OPTOMA HD700X: why the LED is still in red after installation?

    Question from customersQuestion from Christophe M. : Hello, I recently purchased a lamp in your shop. After installing the new lamp for my projector OPTOMA HD700X, I still have the LED in red. What is the problem? Thank...

    Projector lamp: how to know if it is the end of its life?

    Question from customersQuestion from Etienne D. : Hello, Is that the projector lamp produces a loud explosion, something that explodes when approaching the end of its life? Thank you. Etienne D. Answer from justpr...

    What are the different options to replace the lamp of the Acer PD523 projector?

    Question from customersQuestion from Daniel S. Hello, Following the order, I received the item Bulb compatible Acer PD523 (BCEL-EC.J1001.001) but it does not match the correct bulb: it is too large 5mm in width and length, ...

    Screen display of the projector: what causes the dominance of the color green?

    Question from customersQuestion from Jean D. : Hello, The picture displayed on the screen of my projector becomes pale green. It is very unpleasant to see. It seems that it is the green that dominates. I have no idea where...

    Screen display of the projector: what causes the dominance of the color green?

    Question from customersQuestion from Jean D. : Hello, The picture displayed on the screen of my projector becomes pale green. It is very unpleasant to see. It seems that it is the green that dominates. I have no idea where...

    What is the procedure to reset the lamp timer of the Acer PD523 projector?

    Question clientsQuestion from Dasima Hello, I would like to ask if you could send me the procedure to reset the lamp timer of the BENQ MP515 projector because after replacing the old with the new lamp, I do not have any pict...

    Screen display of the projector: what causes the dominance of the color green?

    Question from customersQuestion from Jean D. : Hello, The picture displayed on the screen of my projector becomes pale green. It is very unpleasant to see. It seems that it is the green that dominates. I have no idea where...

    What is the procedure to reset the lamp timer of the Acer PD523 projector?

    Question from clientsQuestion from Dasima Hello, I would like to ask if you could send me the procedure to reset the lamp timer of the BENQ MP515 projector because after replacing the old with the new lamp, I do not have any...

    What are the different options to replace the lamp of the Acer PD523 projector?

    Question from customersQuestion from Daniel S. Hello, Following the order, I received the item Bulb compatible Acer PD523 (BCEL-EC.J1001.001) but it does not match the correct bulb: it is too large 5mm in width and length, ...

    What can we should do to improve the air line of a 3M MP8775i projector?

    Question from customersQuestion from Abdellatif Hello, Our technical manager has completed the installation of the new lamp for 3M MP8775i projector. After this installation, the projector displays us a warning message: "Che...

    What is the manipulation to be done to solve the problem of starting of the Sanyo PLV-Z4 projector?

    Question from customersQuestion from Gwen N. Hello, My Sanyo PLV-Z4 projector starts up with the green LED but after a few seconds it turns off. The light turns red and blinks, after it turns orange, therefore, it indicates ...

    What is the procedure if after replacing the lamp of the Epson EMP-S3 projector, the LED remains red?

    Question from customersQuestion from Jean-Michel H. Hello, At our last order, we bought a compatible lamp for our Epson EMP-S3 projector, and here is the result: after turning on the Epson EMP-S3 projector, the LED flashes ...

    Do you know the different parts to check after replacing the lamp of a SONY VPL-HS60 projector? The answers on www.justprojectorlamps.co.uk

    Question from customersQuestion from Anne F.: Hello, I ordered via your website a replacement lamp for my SONY CINEZA VPL-HS60 projector. I mounted the lamp immediately. The lamp intensity was very low and despite all m...

    What can you do if after replacing the lamp of your PHILIPS Garbo Matchline projector, it does not start?

    Question from customersQuestion from Samuel R.: Hello, The lamp that I purchased works only a few minutes before shutting down for 2 days. On the projector, there is a flashing "lamp" in red, and according to the manual, t...

    How to install a new original lamp ET-LAE1000 for your PANASONIC PT-AE3000 projector?

    Question from customersQuestion from Albert H.: Hello, I am contacting you to ask how can I proceed to install the new original lamp ET-LAE1000 which I ordered for my PANASONIC PT-AE3000 projector? Thank you for advance ...

    What is the cause and solution to the problem of the light green wire that appears on the screen of a Sanyo PLV-Z3000 projector after installing the new compatible lamp LMP135?

    Question from customersHello, I call to you to help me solve my case. I ordered a projector lamp LMP135 for my Sanyo PLV-Z3000, and after its installation, there is a light green wire that passes through the screen. My o...

    How to recognize a lamp for TOSHIBA TDP-T90 projector reaching the end of its usable life?

    Question from customersHello, I ordered in September a new lamp for my TOSHIBA TDP-T90 DLP projector. Now, this original lamp TLPLW3 no longer works. What can I do? Is it still possible to exchange this lamp? Can you give me a ...

    How to solve the power failure of the Sony KF-42SX300U projection TV lamp?

    Question from customers Question from Kamel D. : Hello, My product: generic lamp for LCD TV Sony KF-42SX300U is defective. I received it in July. I kept the original packaging. Here are the details of the problem: the p...

    What is the importance of cleaning the filter for the maintenance of the Sanyo PLV-Z4 projector lamp?

    Question from customers Question from Chris B. : Hello, My Sanyo PLV-Z4 projector lamp reaches probably the end of its life, the colors of the image that is displayed on the projection screen begin to be altered and the br...

    What is the difference between an Epson original lamp and an Epson compatible lamp?

    Question from customers Question from André M. : Hello, My Epson projector lamp reaches certainly its end of life. In my simple observation, its luminosity regresses every day and I do not have the best image quality. In t...

    Are there any risks if you clean yourself the filter of your Optoma HD65 projector?

    Question from customers Question from Charles N.: Hello, In reading the various reasons and procedures for cleaning the filter of the projector, I was wondering if I should also do it because since buying my Optoma HD65 pr...

    How do you know if the problem of brightness and image quality comes from the projector or the Epson EMP-TW600 projector lamp?

    Question from customers Question from Pepi M. : Hello, I have an Epson EMP-TW600 projector and I do not know if the lamp has reached the end of its life. In fact, I have an image that has a tendency greenish, greatly dimin...

    How do you know if the problem of brightness and image quality comes from the projector or the Epson EMP-TW600 projector lamp?

    Question from customers Question from Pepi M. : Hello, I have an Epson EMP-TW600 projector and I do not know if the lamp has reached the end of its life. In fact, I have an image that has a tendency greenish, greatly dimin...

    Why the new lamp for your Mitsubishi HC1500 projector has no brand?

    Question from customers Question from Cyril D.: Hello, I just received the new lamp that I have commanded for my Mitsubishi HC1500 projector. The lamp works well but I am surprised by the fact that the lamp has no brand whe...

    How to install yourself the Epson EMP-TW20 projector lamp?

    Question from customers Question from Ange L.: Hello, I ordered a new lamp for my Epson EMP-TW20 projector. And I would like to know if for its installation, I should ask the service of a technician or what is your advice ...

    How to solve the problem of starting of your Panasonic PT-AE3000 projector after replacing the original lamp Panasonic ET-LAF100?

    Question from customers Question from Jos S. : Hello, We have bought an ET-LAF100 for our Panasonic PT-AE3000 projector with some weeks ago. The lamp does work, however the message "change the lamp" does not disappear. ...

    How to remove the message on the projection screen indicating the replacement of the OPTOMA HD-800X projector lamp?

    Question from customersHello, I need your advice to solve my case: my OPTOMA HD-800X projector often displays the message indicating the lamp is reaching the end of its life and suggesting its replacement. But there are times ...

    How to solve the problem of a new projector lamp SANYO that does not light?

    Question from customersQuestion from Guillaume D. Hello, I bought from you a month ago a new lamp for my SANYO projector. Now it will not turn on. I would like to know your opinion if there is a manipulation that you could a...

    How to restart the OPTOMA HD65 projector after it fused the electric system of your home?

    Question from customers Question from Ludovic N. : Hello, I have an OPTOMA HD6 projector. This morning, it continuously causes the breakers to switch off. I unplugged and all working normally. Then, I said that the problem ...

    What are the actions to be taken after a block of your BENQ PE7700 projector?

    Question from customers Question from S.Motte : Hello, I need your help: my projector BENQ PE7700 is blocked. I tried to reboot several times but it turns off automatically. I want to say that this happened after I changed ...

    Where does the problem of brightness of an Epson EB-S72 projector?

    Question from customers Question from Franck L.: Hello, I have an Epson EB-72 with a lamp ELPLP54. Lately, I have found that the level of brightness of my Epson EB-S72 has decreased significantly. And this morning, I plugge...

    How to solve the problem of colors change of the images of the projector EPSON EH-TW5500?

    Question from customers Question from R. Noa: Hello, I have a problem with the color of the picture displayed on my projector screen. In fact, I occasionally use my projector and when I turned it on this morning, all the col...

    How to solve the failure with the new lamp of the projector OPTOMA DX609?

    Question from customers Question from Charles A.: Hello, I bought a new lamp for my projector OPTOMA DX609. When I started my OPTOMA projector, the light is green but turns red after a few seconds. After that, the lamp does...

    How to maintain the lamp of a projector EPSON EMP-S1 so that it lasts longer?

    Question from customers Question from Tom M.: Hello, I have a projector EPSON EMP-S1. The new projector lamp is still less than 1000 hours of use and it is already losing brightness. Is it already the end of its life? What s...

    What procedure should be followed to resolve the fan failure of a projector OPTOMA EP780?

    Question from customers Question from Colom C.: Hello, I have in my possession a projector OPTOMA EP780 and I have a problem that requires your help. My projector OPTOMA displays a message stating that the fan fails. I do n...

    What is the source of the unpleasant smell of plastic out of the projector Epson EMP-TW2000 after installing the new lamp Epson ELPLP39?

    Question from customers Question from Maxime A.: Hello, I would like to inform you that the bulb what I was buying smell that is not at all pleasant, it is rather like a burnt plastic, and there is a green spot in the mid...

    How to ensure the startup of the Mitsubishi HC5000 projector after installation of the new compatible lamp Mitsubishi VLT-HC5000LP?

    Question from customers Question from Isa L.: Hello, We have purchased a compatible lamp Mitsubishi VLT-HC5000LP projector for our HC5000 few months ago. I just installed it and it does not work. Our video projector rema...

    How to solve the power failure of a projector Dell 2100MP?

    Question from customers Question from Denis A.: Hello, I still have quite specific problems, always in relation to our Dell projector. Indeed, we were able to buy our original projector lamp for DELL 2100MP as expected from...

    How to ensure good light conditions of the projector lamp of your Mitsubishi HC910U?

    Question from customers Question from Jean-Marc C.: Hello, I have returned a projector bulb that my Mitsubishi projector HC910U has detected that it reached the end of its life, after a few hours of operation only. I want t...

    Want to know about the frequency for cleaning the filter of your projector Optoma DS302? Our advices on justprojectorlamps.co.uk

    Question from customersQuestion from Inai S.: Hello, I am very satisfied with the compatible lamp Optoma Sp.86J01GC01 ...

    Want to know about the frequency for cleaning the filter of your projector Optoma DS302? Our advices on justprojectorlamps.co.uk

    Question from customersQuestion from Inai S.: Hello, I am very satisfied with the compatible lamp Optoma Sp.86J01GC01 for my Optoma DS302 I bought from you. I have to change the filter of the projector and I would ask you ...

    How to make last longer a projector lamp?

    Question from customersQuestion from Jean-Yves U. Hello, I want to tell you a problem in relation to the projector lamp that I bought from you. After 4 months of use, it is burned, despite use quite normal and stationary. N...

    How to make the problem of horizontal lines visible on the screen of your projector OPTOMA HD800X disappears?

    Question from customersQuestion from John M. Hello, I am contacting you to announce a problem with the lamp of my Optoma HD800X. In fact, I changed the projector bulb and after making the change, I realize that I have small...

    What can we do if the Optoma EP727 will not start after replacing the projector lamp so that it starts well with the old projector lamp?

    Question from customersQuestion from Marc L. Hello, The lamp of my Optoma EP727 has reached its end of life. I replaced it with a new lamp, my Optoma EP727 starts as usual but after a few hours, everything is turned off, th...

    How to solve the problem of the pink horizontal band that appears at the bottom of the screen of your projector EPSON EH-TW2800?

    Question from customersQuestion from Maria G-C. Hello, I have in my possession for 2 years a projector Epson EH-TW2800. There are now 15 days, when I turn on my projector EPSON, a pink horizontal band appears at the bottom ...

    How to solve the problem of burnt plastic smell after a few hours of using the lamp ET-LAE4000 of your projector Panasonic PT-AE4000?

    Question from customersQuestion from Mathieu B. Dear Sir/Madam, The explanation which I have given on the phone concern one of my projector lamps. I actually ordered (as many of my friends who command you) via the Internet ...

    What are the steps to follow to ensure that the projector lamp Epson EMP-TW520 has been correctly installed?

    Question from customersQuestion from M. Pauzet Hello, Following our order, we have received the product but the new projector lamp does not work. The reference of my projector is Epson EMP-TW520. What is required to solv...

    How to avoid the explosion of the lamp in your projector SONY VPL-EX5?

    Question from customersQuestion from B. Benjamin Hello, My projector lamp SONY VPL-EX5 exploded. I have read some information about this but I would like you to clarify what I should do. What could be the cause of this expl...

    How to solve the dullness of the lamp in your projector NEC VT460?

    Question from customersQuestion from P. LEDEME Hello, There are now two months, we bought a lamp for NEC VT460. From the outset, the brightness of the lamp was low, but sufficient. But for more than a month, we have a probl...

    What could be the cause of low brightness of an Epson EH-TW9000W?

    Question from customersHello, We have a projector, Epson EH-TW9000W, that is only the age of four weeks, and tonight when we have started it, the screen brightness is very low. Thinking it was just a bad display setting, we we...

    How to remove the vertical band out of your Optoma HD25?

    Question from customersHello, I have a big worry concerning the appearance on screen of my Optoma HD25. In fact, in recent days, there is a very annoying vertical band. This is what I wanted to avoid when I’ve purchased this p...

    What to do after the explosion of the lamp inside your LG PF80G projector?

    Question from customersHello, I watched a movie last night and suddenly I heard a loud bang inside my projector LG PF80G! After checking my LG projector, it seems like the lamp exploded. There are fragments of glass inside the...

    What could be the cause of low brightness of an Epson EH-TW9000W?

    Question from customersHello, With my Epson EH-TW5200 projector, I have no image that appears on the screen. When I turn on my projector, the message appears "No Signal". What could cause this problem? Thank you in advance ...

    What can you do if the incorrect image is projected with your Optoma HD26?

    Question from customersHello, I would like your advice and assistance. It?s about the display problem of my Optoma HD26. That's two years since I use it and I've never had a problem images like now. I can send you a photo of t...

    How to correct a blurry or unclear picture of your Optoma HD139x?

    Question from customersHello, Could I have your help about my new Optoma HD139x? I just made my first installation and projection is imprecise, the entire image projected on the screen is not clear. How to take corrective blur...

    How to solve the noise problem with your Optoma HD25?

    Question from customersQuestion from Marc M. : Hello, With my Optoma, I meet a lot of "noise" when the image is projected. Especially means the scenes during the darkest films. I changed my DVD player and my wiring but it r...

    How to restore the signal between the Epson EB - S18 and your Toshiba laptop?

    Question from customersQuestion from L. Mary : Hello, I need your help because I don’t know what to do or what happens between my computer and my Epson projector. In fact, during my usual presentation at work, my Epson proj...

    How to have dual displays on your computer and projector Epson EH- TW490?

    Question from customersQuestion from Franck N. : Hello, I have to connect my Epson projector to my new laptop, but the problem is that: it is impossible to achieve a "dual". I tried to switch it with the FN key and the F8 k...

    Ask our technician a question about video projectors

    OUR NEWS  

    17/5/2019
    Sony VPL HS60 projector, a projector designed for home cinemas...

    ViewSonic PX702HD is, in technical terms, a projector that features DLP technology to improve colour display and limit the rainbow effect. It boasts Full HD resolution (1920 x 1080 pixels), ...
    > Read more..

    27/2/2019
    Infocus IN76, a video projector that is ready to use with its factory settings...

    Epson relies on mobility and versatility with the EB-S04 model. The machine weighs only 2.4 kg [4.4 lbs] measuring 77x234x297 mm. It can be used just as easily to watch movies a...
    > Read more..

    x

    Ask for a Call Back